RIGOL DSA875 - Manual (Page 26)

RIGOL Chapter 2 Trial and Activation
2-2 User’s Guide for EMI Test System
Trial
EMI Test System provides a 15-day trial period. When the trial period expires,
you need to activate the software (for the activation method, refer to the
introduction below). Otherwise, you cannot use the software.
When EMI Test System is started for the first time, the prompt message as
shown in Figure 2-1 is displayed.
Explanations:
(1) Click “Probation (15 days)”; EMI Test System enters the trial mode and
starts timing. Within the trial period, the prompt message as shown in Figure
2-2 is displayed each time the software is started. When the 15-day trial
period expires, the prompt message as shown in Figure 2-3 is displayed; at
this point, you can only use the software by registration or you can click
"Cancel" to exit the program.
(2) Click “Activate” and the dialog box as shown in Figure 2-4 is displayed. You
can input the registration code to activate the software or close the dialog box
directly to close the software.
(3) Click “Cancel” and the software is closed.
Figure 2-1 Trial Prompt Message
Figure 2-2 Remaining Trial Time
Prompt Message
Figure 2-3 Trial Period Expiration
Prompt Message