8indications – RISCO Group axesplus® User Manual

Page 45

User Manual for Hardware Installation

Uncontrolled when printed

Indications

Various indications are given through Light Emitting Diodes (LEDs), 7 segment display and PMC.

First let us go through LED indications and the followed by 7 segment display indications.

8.1

LED Indications for Proxy

5V_PWR shows the health of Proxy - DCC connection

Behavior: If Proxy is able to communicate with DCC then this LED will blink slowly (4 Sec ON and 4

Sec OFF)

If Proxy is not able to communicate with DCC then the LED will blink at a faster rate (1 Sec ON and 1

Sec OFF)

GEN_LED shows the connectivity of the Proxy to DCC over the backup medium (GSM/PSTN)

Behavior: On the start up this LED will be ON and then it will switch OFF

If the Proxy is connected to DCC through the Back up medium (GSM/PSTN) this LED will be ON.

If the Proxy is connected to DCC over LAN then this LED will be OFF

8.2

LED Indications for ACCB

SYS_LED shows the health of ACCB - Proxy Connection

Behavior: If ACCB is able to communicate with Proxy then this LED will blink slowly (4Sec ON and 4

Sec OFF)

If ACCB is not able to communicate with Proxy then the LED will blink at a faster rate (1 Sec ON and

1 Sec OFF)