RISCO Group axesplus® User Manual

Page 42

User Manual for Hardware Installation

Uncontrolled when printed

Proxy Settings

It consists of the following fields:

• Account_ID = "ACC12";

This is available from RISCO, it indicates to which account the proxy has to register.

• RSP_IP_OR_URL = "172.29.51.120";

Here you need to mention either the IP of the RSP or its URL. If URL is mentioned then it’s

mandatory to enter the fields – LAN_DNS_IP_ADDRESS_1 and LAN_DNS_IP_ADDRESS_2.

For example, in case of URL the field value changes to:

RSP_IP_OR_URL = "www.risco.com";

• LAN_DNS_IP_ADDRESS_1 = "172.29.48.130";
• LAN_DNS_IP_ADDRESS_2 = "172.29.6.130";

Here you mention the Domain Server name of the network. It’s mandatory in case the

RSP_IP_OR_URL has a URL.

• Additional_RSP_Gateway_IP_Address = "172.29.48.134";

Some networks may need an additional gateway to connect o the external RSP IP or URL. If

additional gateway is required IP address of the gateway is given in this field.

• NAT_IP = “0.0.0.0”;

This field is the NATTED IP field to get connected to the RSP. Leave the value in this field as 0.0.0.0 if

you do not want to use it. If any valid IP is provided, then the Proxy will try to get connected to the

RSP through this IP.

• GSM_UserName = "idea";
• GSM_Password = "";
• GSM_AccessPointName = "internet";
• PSTN_UserName = "";
• PSTN_Password = "";
• PSTN_Dialing_Number = "12345";

The above details are provided by the specific vendors and also can be changed form ACIS. These

are required if the Proxy has to connect to RSP using either GSM or PSTN modules.

ACCB Settings

There are following fields for ACCB settings:

• Active_PROXY_IP_Address = "172.29.48.152";
• Backup_PROXY_IP_Address = "0.0.0.0";

Active and back up Proxy IP is set from ACIS.