RISCO Group axesplus® User Manual

Page 44

User Manual for Hardware Installation

Uncontrolled when printed

• LDAP_Server_IP_Address = "172.29.65.99";
• LDAP_Admin_DN=””;
• LDAP_Admin_Passwd=””;
• LDAP_Base_DN=””;
• LDAP_Search_Filter=””;

It signifies the LDAP server details and credentials.

• Proxy_Syslog_Level = 0;

It’s the Proxy log level. It can be changed from ACIS.

ACCB Settings

Following fields are available in the ACCB level settings:

• Number_Of_Events_To_Buffer = 1500;

This indicates the maximum number of events that can be stored in case of connection failure.

• ACCB_Syslog_Level = 0;

It’s the ACCB log level. It can be changed from ACIS.

7.3

Configuring the Board

To configure the ACCB/ Proxy using the USB:

1. Copy the two CFG files into the into a Universal Serial Bus (USB) key.
2. Start the ACCB and Proxy with the USB key plugged into it. The CFG files will be copied

from the USB key to the board. The board will be configured as per the parameters set in
the CFG files.