RISCO Group axesplus® - Manual (Page 2)

User Manual for Hardware Installation
Uncontrolled when printed © RISCO Group i
About This Manual
Purpose
This manual has been written to help you understand and use the hardware devices used to implement the
RISCO Access Control System. It presents the functional capabilities and operational details of hardware and
contains the procedures that you should know for installing and configuring the hardware settings.
Intended Audience
This document is intended to be used by the installers who will install the hardware devices for the client at
the location where the RAC system has to be deployed.
Prerequisites for Use
Basic understanding of the Access Control Systems and Security systems is essential for using this manual.
Organisation of the Manual
This manual is organized in the following manner:
Hardware Introduction introduces the hardware devices of the RAC System.
Topology Diagrams of the System provides the topology diagrams illustrating the devices and their
connections.
Board Specifications provides the specifications for proxy, ACCB and ACIB. The power requirements for the
devices are displayed.
Proxy Connection Diagram describes the proxy board layout and the connection with PMC and without
PMC.
ACCB Connection Diagram describes the ACCB board layout and the connection with PMC and without
PMC.
ACIB Connection and Settings describes the ACIB Board Connections with Relays, Sensors and Readers.
Configuring Proxy describes the process to configure a proxy.
Configuring ACCB describes the process to configure an ACCB.
Indications provide the details of the LED indications by the devices.
Appendix A provides the types of readers (compatible with the RAC system) and their connections with the
ACIB.
FAQ’s are provided in the document.
Glossary provides explanation for terms and concepts in the manual.
Contact provides the contact details of Risco.
Index of the terms, concepts and tasks in the user manual are provided.