RISCO Group axesplus® - Manual (Page 32)

User Manual for Hardware Installation
Uncontrolled when printed © RISCO Group 31
Figure 19: Reader Terminals
Each reader allows using the following signals:
• RXD/B, TXD/A for asynchronous serial communication from 1200bps to 115200bps. DAT0,
CLK and GLED, RLED control. Power lines are also available with 12v or 5v selecting for each
reader in each door separately.
Baud Rate Selector
Use the following Baud Rate Selector for all the readers which use RS232 or RS485 interface (Switch1
and Switch 5. are not used):