RISCO Group RISCO 8 Zone Expander RP432EZ8 - Manual

RISCO 8 Zone Expander
(RP432EZ8)
The RISCO 8 Zone Expander (RP432EZ8) enables to expand the number of wired zones in the LightSYS
and ProSYS Plus.
DIP Switches Settings
Switch 1-5 Defines the Zone Expander ID
number.
Switch 6-7 Not Applicable
Switch 8:
Tamper Bypass Instead of a short between the
TMP/COM terminal block)
Zone Termination
Note: :
The RP432EZ8 enables to define the end-of-line resistance of its zones. Selection is done through the software with the
following available options. The TEOL configuration is applicable for all versions of ProSYS Plus and LightSYS
Version 3 or later.
No EOL DEOL No EOL DEOL No EOL DEOL TEOL
0 Customized 5 3.74K 6.98K 10 3.3K 3.3K
1 2.2K 2.2K (Dflt) 6 2.7K 2.7K 11 5.6K 5.6K
2 4.7K 6.8K 7 4.7K 4.7K 12 2.2K 1.1K
3 6.8K 2.2K 8 3.3K 4.7K 13 2.2K 4.7K
4 10K 10K 9 1K 1K 14 4.7K 6.8K 12K
Technical Information
Current Consumption 20 mA typical, 29mA Maximum
Main Panel Connection 4-wire BUS, ≤300 m from Main Panel
EN