Precision Digital PD6310 - Manual (Page 81)

Model PD6210 & PD6310 Batch Controllers Instruction Manual
81
Programmable Function Keys User Menu (user)
The User menu allows the user to assign the front panel function keys
F1, F2, F3, F4 (digital input) and up to eight digital inputs (DI 1 to DI 8) to
access most of the menus or to activate functions immediately (e.g.
Reset max & min). Up to eight digital outputs (DO 1 to DO 8) can be
assigned to a number of actions and functions executed by the controller
(e.g. Alarms, relay acknowledgement, etc.).
Function Keys & Digital I/O Available Settings
Display Description Display Description
Start
Start batch
reset
Reset Menu
stop Pause/stop batch Rst t Reset total
srtstp
Start/stop combo
Rst Gt
Reset grand total
Rly d Disable all relays Rst bc Reset batch count
Rly e Enable all relays Rst Hi Reset max
O Hold Output level hold Rst Lo Reset min
D Hold Display hold Rst HL Reset max & min
big Hi Max on Upper display relay Relay menu
big Lo Min on Upper display Preset Change preset
big Hl
Max/min on Upper
display
Set 2 Set point 2 – 8
Lit Hi Max on Lower display menu Enter menu (DI only)
Lit Lo Min on Lower display Right Right/F1(DI only)
Lit HL Max/min Lower display up Up/F2 (DI only)
Lit gt GT on Lower display enter Enter/F3 (DI only)
Lit bc Batch count display F On 1 Force relay 1 on (DI only)
Contrl
Control Menu
F On 2
Force relay 2 on (DI only)
disabl Disable input/button F On 3 Force relay 3 on (DI only)
AcH
Acknowledge relays
F On 4
Force relay 4 on (DI only)
!
Changing the programming of the F1-F3 function keys will
disable the default batch operation of these keys, and is
not recommended for batch control applications.