Precision Digital PD6310 - Manual (Page 51)

Model PD6210 & PD6310 Batch Controllers Instruction Manual
51
Time Base, Total Conversion Factor & Total Reset
The time base, total conversion factor, and total reset menus are located
in the Program menu.
The total and grand total have their own independent settings. This
means that one can be displaying the value in gallons while the other
displays in million gallons, liters, m
3
, etc.
Batch Start Mode (mode)
The batch controller may operate in manual or automatic mode. In
manual mode, the controller operates as defined in Controller Operation
as described on page 35. In automatic mode, the batch process will
automatically begin after a completed batch. The time delay for the
restart may be 0.1 to 999.9 seconds (t dly). Automatic batch start will
only occur after a successful batch. A manually stopped batch will
require a manual start to begin a new batch process.
Grand Total Reset
The grand total can be programmed for manual or automatic reset. In the
automatic reset mode, a programmable time delay is available to reset
the grand total after the assigned preset is reached.
Non-Resettable Totalizer
The total and grand total can be password-protected to prevent
unauthorized resets. The grand total can be programmed as a non-
resettable total, see page 70 for details.