Precision Digital PD6310 - Manual (Page 44)

Model PD6210 & PD6310 Batch Controllers Instruction Manual
44
Setting Numeric Values
The numeric values are set using the Right and Up arrow buttons. Press
Right arrow to select next digit and Up arrow to increment digit value.
The digit being changed is displayed brighter than the rest.
Press and hold up arrow to auto-increment the display value.
Press the Enter button, at any time, to accept a setting or Menu button to
exit without saving changes.
Setting Up the Batch Controller (setup)
The Setup menu is used to select:
1. Input signal the controller will accept
2. Enable or disable totalizer and batching features
3. Select the display units/tags
4. Decimal
point position
5. Program menu for scaling or calibration
6. Display parameter and intensity
7. Relay
operation
8. 4-20 mA analog output scaling
Press the Enter button to access any menu or press Up arrow button to
scroll through choices. Press the Menu button to exit at any time.
Please reference the “Setup” flow chart on the following page in
order to view the Setup Menu hierarchy for both the PD6210 and
PD6310.
0 0 4.000 00 4 .000 00 5 .000
dis 1 dis 1 dis 1
Next
Setting
Select
Next
Digit
Increment
Digital
Value
Accept
Setting