Precision Digital PD6310 - Manual (Page 53)

Model PD6210 & PD6310 Batch Controllers Instruction Manual
53
Setting the Display Parameter & Intensity (dsplay)
The Upper display (Big) can be programmed to display:
1. Display total
2. Display grand total
3. Toggle rate and total
4. Toggle rate and grand total
5. Display
batch count
6. Relay set points
7. Toggle preset and rate
8. Toggle rate and units
9. Toggle total and units
10. Toggle grand total and units
11. Display max and min values
12. Display Modbus input
13. Display rate value
The Lower display (Little) can be programmed to display:
1. Toggle rate and units
2. Toggle total and units
3. Toggle grand total and units
4. Display max and min values
5. Display
Modbus input
6. Off (no display)
7. Display
rate units
8. Display rate
9. Display total
10. Display grand total
11. Toggle rate and total
12. Toggle rate and grand total
13. Display batch count
14. Relay set points
15. Toggle preset and rate
Display Intensity: The meter has eight display intensity levels to give the
best performance under various lighting conditions. Select intensity 8 for
outdoor applications. The default intensity setting is 8.
For direct sunlight readability, Sunbright display models are highly
recommended. See Ordering Information on page 7 for details.