MCZ PowerBox COMPACT - Manual (Page 25)

Chapter 4
INSTALLATION AND USE MANUAL
page
25
Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited
After long periods of disuse, remove from the hopper (using
a vacuum cleaner with an extension) any remains of
pellets which have lain there for some time, since they may
have absorbed moisture, which changes their original
characteristics and makes them unsuitable for burning.
4.3. LOADING PELLETS FOR THE COMPACT POWERBOX
Loading fuel must take place through the front compartment located
above the Powerbox door.
To make fuel loading easier, perform the following steps:
• Open the door using the provided hook. The guides have stops
that block the mobile part once it is extracted all the way out.
To block the drawer in its most extended position, lift it slightly
and pull it towards you. (Figure 1)
• Pour the pellets into the tray directly from the sack or use the
provided scoop (A)
• Using the provided tool (B), push the pellets towards the
hopper.
Do not place any type of fuel in the hopper other than
pellets that are compliant with the specifications
provided previously.
Scoop A:
Tool B:
Pellet
Fig. 1 Drawer unit