Epson Expression Premium XP-635 Refurbished - Manual (Page 59)

Disconnecting or Initializing the Network
Disabling Wi-Fi from the Printer's Control Panel
When Wi-Fi is disabled, the Wi-Fi connection is disconnected.
1. Select the Wi-Fi Setup on the home screen.
2. Select Disable Wi-Fi.
3. Check the message, and then select Yes.
Disconnecting Wi-Fi Direct from the Printer's Control
Panel
Note:
❏ When Simple AP mode is disabled, all devices connected to the printer in Simple AP mode are disconnected. If you want
to disconnect a specific device, disconnect from the device instead of the printer.
❏ If you disconnect Wi-Fi Direct mode from the printer or from a device, the network is returned to its original setup.
1. Select Wi-Fi Setup on the home screen.
2. Select Wi-Fi Direct Setup > Disconnect.
3. Check the message, and then select Yes.
Initializing the Network Settings from the Printer's
Control Panel
You can restore all network settings to their defaults.
1. Select Setup on the home screen.
2. Select Restore Default Settings > Network Settings.
3. Check the message, and then select Yes.
Disabling Wi-Fi from Web Config
To use Web Config, printers and devices must have an IP address and be connected to the same network.
Network Guide
Disconnecting or Initializing the Network
59