Connecting through an access point, Connecting by wi-fi – Epson Expression Premium XP-635 Refurbished User Manual
Page 10
with each other through the printer. There are two ways to connect to the printer from a smart device; Wi-Fi
connection and Wi-Fi Direct connection.
The printer can be connected by Wi-Fi and Simple AP mode simultaneously. However, if you start a network
connection in Simple AP mode when the printer is connected by Wi-Fi, the Wi-Fi is temporarily disconnected.
❏ Wi-Fi Direct Mode
You can establish a one-to-one connection between the printer and a smart device. Since the network
connection is disconnected in Wi-Fi Direct mode, this type of connection should only be used as a temporary
measure. Your smart device must be Wi-Fi Direct capable. See the documentation provided with your smart
device for details.
Related Information
&
“Connecting by Wi-Fi Direct” on page 12
&
“Basic Network Information Used by the Printer” on page 77
Connection Settings Between the Printer and a Smart
Device
Connecting through an Access Point
Connecting by Wi-Fi
Connect the printer to the access point by Wi-Fi, and select the same network (SSID) as the smart device. Make the
following settings.
Making Wi-Fi Settings on the Printer
Use one of the following methods to set up the Wi-Fi and connect to the access point.
Network Guide
Connecting the Printer to a Smart Device
10