Epson 440 - Manual (Page 50)

If you are going to use the optional LocalTalk Interface Card
(C82312✽) or Ethernet Interface Card (C82331✽), you need
to assign a name to your printer using the EPSON Namer
utility as described on page 2-27. If you are using a serial
interface, skip to “Using the Chooser to select your printer”
on page 2-27.
Printer software components
Your printer software CD-ROM contains the following
software components:
EPSON Stylus Printer Driver Package
❑ EPSON Stylus (EX)
This is the printer driver software that runs your printer if
you are using the serial interface.
❑ EPSON Stylus (AT)
This is the printer driver software that lets you use the
printer on an AppleTalk network.
❑ EPSON Monitor2
Monitors and manages background printing jobs. You must
turn on background printing in the Chooser to use this
utility. For more information, see “Using the EPSON
Monitor2 Utility” on page 6-25.
❑ ColorSync

2.0 and Profiles
Matches the colors in your printout with the colors
displayed on your screen automatically. Use this when
printing scanned photographs or computer graphics.
To use this feature, you may need to set the system profile
for your monitor. Access the ColorSync System Profile
utility through the Control Panel and click the Set Profile
button. Select your monitor from the list of monitors that
appears, and then click Select. Close the dialog box.
L
Easter2 Ref. Guide
Rev.b
A5 size Chapter 2
05-28-97 DR, pass 3
2-26 Getting Started