Epson 440 - Manual (Page 19)

Buttons
Buttons Function
-
load/eject
Loads and ejects paper. Starts charging ink (after you
finish the ink cartridge replacement procedure).
2
power
Turns the printer on and off. Clears the print buffer if
pressed twice while the power is on.
;
black print
head cleaning
Cleans the black print head if pressed for about three
seconds. Starts the black ink cartridge replacement
procedure if pressed while the
* ink out light is flashing
or on. This button is located inside the printer cover.
X
color print
head cleaning
Cleans the color print head if pressed for about three
seconds. Starts the color ink cartridge replacement
procedure if pressed while the
) ink out light is flashing
or on. This button is located inside the printer cover.
Lights
The lights on the front of the printer indicate the printer status,
such as receiving data, paper jam, or ink is low. The following
table describes what the lights mean.
5 * ) 2 Printer Status
- - - F
Receiving data, replacing an ink cartridge,
charging ink, or cleaning print heads.
N - - -
Paper out. Load paper in the sheet feeder; then
press the
-
load/eject button to resume printing.
F O O -
Paper jam. Turn off the printer and gently pull all
the paper out of the printer.
- F - -
Ink low. The black ink cartridge is nearly empty.
Obtain a replacement black ink cartridge
(S020108).
- N - -
Ink out. The black ink cartridge is empty.
Replace the black ink cartridge (S020108).
- - F -
Ink low. The color ink cartridge is nearly empty.
Obtain a replacement color ink cartridge
(S020089).
- - N -
Ink out. The color ink cartridge is empty.
Replace the color ink cartridge (S020089).
N = on, O = off, F = flashing, - = irrelevant
1
R
Easter2 Ref. Guide
Rev.b
A5 size Chapter 1
05-20-97 DR, pass 0
Getting to Know Your Printer 1-3