Epson 440 - Manual (Page 123)

❑ To print on the coated (whiter) side of Photo Paper, select
Photo Quality Glossy Paper
as the Media Type setting
and EPSON PhotoPaper 4X6 in as the Paper Size setting in
your printer driver.
Note:
The outside edge of your image might be cut off when you remove
the perforated margins.
❑ You can also print with black ink on the non-coated side
(EPSON logo side) of Photo Paper. To print on this side,
select 360 dpi Ink Jet Paper as the Media Type setting and
then select EPSON Photo Paper 4X6 in as the Paper Size
setting.
❑ Cut or tear the paper at the perforation only after printing.
Do not cut, tear, or fold the paper before printing.
trim size
17 mm (0.67 in.)
printed image size
6 mm (0.24 in.)
3 mm (0.12 in.)
6 mm 3 mm
c-24b
7
R
Easter2 Ref. Guide
Rev.b
A5 size Chapter 7
05-20-97 DR, pass 0
Printing on Special Paper 7-9