Epson 440 - Manual (Page 137)

8. Press the ink cartridge clamp down until it locks in place.
9. If you need to replace the other ink cartridge as well, press
the appropriate cleaning button (
;
for black,
:
for color),
then repeat steps 4 through 8.
10. Press the
-
load/eject button then close the printer cover.
The printer moves the print heads and begins charging the
ink delivery system. This operation takes about two
minutes to complete.
c
Caution:
The
2
power light continues to flash while the printer
performs the ink charging operation. Never turn off the
printer while the
2
power light is flashing. Doing so can
result in incomplete charging of ink.
When the ink charging process is finished, the printer
resumes printing any data remaining in its memory or
returns the print heads to their home position. Then the
2
power light stops flashing.
Even if you do not press the
-
load/eject button, the printer
moves the print heads and begins the ink charging process
about 60 seconds after you replace the ink cartridge.
e-25
9
M
a
int
e
na
nc
e
R
Easter2 Ref. Guide
Rev.b
A5 size Chapter 9
05-20-96 DR, pass 0
Maintenance and Transportation 9-7