Epson 440 - Manual (Page 224)

International character sets
You can select one of the following international character sets with the
default-setting mode or the ESC R command. For example, when you
select “Italic France,” the characters in the “France” row on the table
below are used in the italic character table.
The following eight international character sets can be selected with the
default-setting mode or with the ESC R command.
The following seven additional sets can be selected only with the ESC R
command.
L
Easter2 Ref. Guide
Rev.b
A5 size Appendix c
05-29-97 DR, pass 2
C-20 Specifications