KACO Powador 10.0 - 20.0 TL3 - Manual (Page 54)

13 EU Declaration of Conformity
Manufacturer’s name and address KACO new energy GmbH
Carl-Zeiss-Straße 1
74172 Neckarsulm, Germany
Product description Photovoltaic feed-in inverter
Type designation 12.0 TL3 - INT / 14.0 TL3 - INT / 18.0 TL3 - INT / 20.0 TL3 - INT
This is to confirm that the units listed above comply with the protection requirements set forth in the Directive of
the Council of the European Union of 15th December 2004 on the harmonisation of the laws of the member states
relating to Electromagnetic Compatibility (2004/108/EC) and the Low Voltage Directive (2006/95/EC).
The units conform to the following standards:
2006/95/EC
“Directive relating to electrical equipment
designed for use within certain voltage limits”
Safety of the unit
IEC 62109-1:2010
IEC 62109-2:2011
2004/108/EC
“Directive relating to electromagnetic
compatibility”
Interference immunity
EN 61000-6-1:2007
EN 61000-6-2:2005
Emitted interference
EN 61000-6-3:2007 + A1:2011
EN 61000-6-4:2007 + A1:2011
Secondary effects on the grid
EN 61000-3-2:2006* + A1:2009 + A2:2009
EN 61000-3-3:2008*
EN 61000-3-11:2000**
EN 61000-3-12:2011**
* valid for device types with a rated current ≤ 16 A
** valid for device types with a rated current ≥ 16 A
The types mentioned above are therefore labelled with the CE mark.
Any unauthorised modifications to the supplied units and/or any use of the units that is contrary to their proper use
shall render this Declaration of Conformity null and void.
Neckarsulm, 10/2/2014
KACO new energy GmbH
p.p. Matthias Haag
Member of the Executive Board for Technology / CTO