KACO Powador 10.0 - 20.0 TL3 - Manual (Page 40)

EN EN
Configuration and Operation
Page 40 Operating Instructions Powador 12.0 TL3-20.0 TL3
Country-
spec. Setting
Menu
level
Display/settings Action in this menu/meaning
DE-MSp, FR,
PL, RU, ES,
TH, UD
0 1 2 3 2 Q(U) characteristic
" Specify the target voltage.
" Specify gradient.
" Specify change time.
GB, IT, AT, KR
0 1 2 3 2 Q(U) 5 Supports
" Open the menu: Press the right arrow button or
the OK button.
0 1 2 3 3 Lock-in power
" Power range set as % of rated power, in which the
network support process is active.
0 1 2 3 3 Lock-out power
0 1 2 3 3 Time constant " Set the response speed of the control.
0 1 2 3 3
Number of support
points
" Specify the number of support points for the idle
power characteristic curve.
0 1 2 3 3
1., 2. ...Support
point
" Specify the support points for voltage, power and
nature of the phase shift
0 1 2 3 2 Q(U) 2-point
" Open the menu: Press the right arrow button or
the OK button.
0 1 2 3 3 Lock-in power
" Power range set as % of rated power, in which
the network support process is active.
0 1 2 3 3 Lock-out power
0 1 2 3 3 Time constant " Set the response speed of the control.
0 1 2 3 3 1.-4. Support point
" Specify the support points for voltage, power and
nature of the phase shift
DE-NSp, BE, 0 1 2 3 1 Line error
Display of grid faults.
" To show the last 5 grid fault messages, select the
“Display” key.
DE, GB, AT 0 1 2 3 1
Protection
parameters
Display of essential protection parameters.
" To show the protection parameters, select the
“Display” key.
0 1 2 3 0
“Information”
menu
" Open the menu: Press the right arrow button or
the OK button.
0 1 2 3 1 Inv. type
Displays the type designation of the inverter.
If feed-in power is actively limited: display maximum
power in kW.
0 1 2 3 1 SW version Displays the installed software version.
0 1 2 3 1 Serial no. Displays the serial number of the inverter.
0 1 2 3 1 Display country
Displays the selected country setting.
Optional: Displays the grid type if a grid type has
been selected.
0 1 2 3 0
“Vendor”
menu
The display shows information about the unit
manufacturer.