Yaskawa MP900 Teach Pendant - Manual (Page 43)

Operation
3.1.3 Operation Settings
3 -12
2. Input the step amount using the Numeric Keys and press the ENT Key to confirm.
Using the Physical Axis
1. Move the cursor to the input area of the physical axis address to be set, using the Up and
Down Cursor Keys, as shown in Figure 3.19 and Figure 3.21.
Figure 3.19 Set Step Screen 2
Figure 3.20 Set Step Screen 3
Figure 3.21 Set Step Screen 4
2. Input the step amount using the Numeric Keys and press the ENT Key to confirm.
When more than one Module is connected to the MP920 or CP-9200SH, axes step amounts can be set for 1 to
16 Modules.
To switch among the Modules, press the SHIFT + NEXT Keys, or SHIFT + PREV Keys.
3
INFO