Yaskawa MP900 Teach Pendant - Manual (Page 35)

Operation
3.1.2 System Settings
3 -4
J Machine Type
Operating procedures from the Machine Type Screen are described below.
Figure 3.4 Select Machine Screen
1. Select a machine number (1 to 3) using either the Cursor or Numeric Keys.
2. Press the ENT Key to confirm the selection.
An asterisk will be displayed in the space to the right of the machine number. This asterisk
indicates the machine type that has been selected. When a machine type is already se-
lected, it will be cleared and the asterisk will be reset.
In this version (REV 1.00), the CP-9200SH cannot be selected.
J Program
Operating procedures from the Set Program Name Screen are described below.
Figure 3.5 Set Program Name Screen
Use the Numeric Keys or the ENT Key to input the motion program name. It is fixed at MPM.
Information on the following monitoring functions will be displayed for the motion program
number.
D Program current position monitoring function.
D Program status and program alarm monitoring function.
D Register display function (D Register).
3
INFO