Enterasys Networks ROAMABOUT RBT-1602 - Manual (Page 28)

Overview of Connecting Cables to the Access Point
2-2 AP Placement and Configuration
Overview of Connecting Cables to the Access Point
Before cabling the AP, you should install the AP to a wall or ceiling. For detailed hardware
installation procedures, refer to the RoamAbout Wireless Access Point Hardware Installation Guide
specific to your AP.
RBT-4102
Figure 2‐1 illustrates the RBT‐4102 to antenna cable configurations. Table 2‐1 lists the RBT‐4102 to
antenna cable components. Table 2‐2 lists the RBT‐4102 installation components.
Figure 2-1 RBT-4102 Installation Overview
Switch