Enterasys Networks ROAMABOUT RBT-1602 - Manual (Page 23)

Cable Options
RoamAbout Antenna Site Preparation and Installation Guide 1-11
Cable Options
The RoamAbout low‐loss, outdoor, watertight cables that you use to connect the RoamAbout AP
to an antenna are available in the lengths listed in
Table 1‐6 .
All cables have Reverse‐N Female connectors on both ends.
To ensure you order the right cable length, carefully determine the distance between the locations
where you intend to mount the RoamAbout AP and outdoor antenna.
Lightning Protector
Table 1‐7 provides information about the RoamAbout Lightning Protector for use with
RoamAbout antennas.
Table 1-6 Cable Options and Model Numbers
Model Number Description
RBTES-L200-C20F 20 feet (6.1 meters) LMR200
RBTES-L600-C25F 25 feet (7.6 meters) LMR600
RBTES-L400-C50F 50 feet (15.24 meters) LMR400
RBTES-L600-C50F 50 feet (15.24 meters) LMR600
RBTES-L400-C75F 75 feet (22 meters) LMR400
Note: Enterasys Networks does not recommend using this cable due to the
loss factor.
Note: Enterasys Networks recommends using LMR600 (part number RBTES-L600-C25/50F)
because of the high losses.
Table 1-7 Lightning Protector
Model Number Description
RBTES-AG-LPM Reverse-N Male on both ends
Male connector housing and male center contact.