Enterasys Networks ROAMABOUT RBT-1602 - Manual (Page 25)

Contacting an Antenna Installation Company
RoamAbout Antenna Site Preparation and Installation Guide 1-13
Contacting an Antenna Installation Company
Have an antenna installation professional install the outdoor antennas. The antenna installer
provides the expertise to properly install, secure, and ground your antenna. The following
checklists describe tasks that the installer may need to perform.
Lightning Protection
√ Determine the mounting location for the lightning rod (positioned near the antenna).
√ Ensure an earth ground location for the antenna structure and Lightning Protector.
Mounting Requirements
√ Determine the type of mounting that is required (tripod, wall mount, etc.).
√ Determine the guy wires needed. Typically, three guy wires are needed for each 3 meter
(10 foot) section of the mast; for example, 6 meters (20 feet) of mast requires six guy wires.
Line of Sight
√ Determine the mounting location for the antenna.
√ Ensure that the back of the antenna is clear.
√ Ensure that remote and local antennas can see each other.
√ Ensure that no obstacles are in the direct path or within the defined zone of the two sites.
√ Consider whether any Radio Frequency (RF) interference is present.
Note: The antenna installation professional should be licensed or certified in accordance with local
regulations.