Yaskawa U1000 Industrial MATRIX Drive - Manual (Page 13)

i.2 Receiving
u Model Number and Nameplate Check
Please perform the following tasks after receiving the drive:
• Inspect the drive for damage.
If the drive appears damaged upon receipt, contact the shipper immediately.
• Verify receipt of the correct model by checking the information on the nameplate.
• If you have received the wrong model or the drive does not function properly, contact your supplier.
u Nameplate
MADE IN JAPAN
PRG : 1010
IND.CONT.EQ.
7J48 B
CIMR-UU4A0011AUA :
: AC3PH 380-500V 50/60Hz 8.7A/10A
: AC3PH 0-475V 0-400Hz 9.6A/11A
: 20 kg
: 6W3050-2-100
: J0065F575310100
: E131457 IP00 PASS
MODEL
REV : A
INPUT
OUTPUT
MASS
O / N
S / N
FILE NO
YASKAWA ELECTRIC CORPORATION
2-1 Kurosaki-shiroishi, Yahatanishi-Ku, Kitakyushu 806-0004 Japan
F
E
D
B
A
C
: C/C
G
H
I
A – Normal Duty amps / Heavy Duty
amps
B – Software version
C – Address
<1>
D – Enclosure type
E – Serial number
F – Lot number
G – Output specifications
H – Input specifications
I – AC drive model
Refer to Figure i.4 for details.
Figure i.3 Nameplate Information Example
<1> The address of the head office of Yaskawa Electric Corporation (responsible for product liability) is shown on the nameplate.
i.2 Receiving
YASKAWA ELECTRIC TOEP C710636 04C U1000 Industrial MATRIX Drive Quick Start Guide 13