SMA STP 15000TL Installation - Manual (Page 84)

Decommissioning SMA Solar Technology AG
84 STP20TLHE-IA-IEN122222 Installation Manual
8. Screw the lower enclosure lid of your inverter onto the replacement device.
9. Now attach the two transport lids of the replacement device to your inverter in the same manner.
☑ Your inverter is now ready to be sent back to SMA Solar Technology AG.
10. Mount and connect the replacement device (see Section 5.3 "Mounting the Inverter" (page 23)
and Section 6 "Electrical Connection" (page 27)).
12.3 Packing the Inverter
• If the original packaging is available, the inverter should be packed in its original packaging
and be secured with tension straps.
• If the original packaging is not available, use a cardboard box suitable for the weight and size
of the inverter.
12.4 Storing the Inverter
Store the inverter in a dry place where ambient temperatures are always between
‒25°C and +60°C.
12.5 Disposing of the inverter
Dispose of the inverter at the end of its service life in accordance with the current locally applicable
disposal regulations for electronic waste. Alternatively, send it back to SMA Solar Technology AG
with shipping paid by sender, and labelled "ZUR ENTSORGUNG" ("FOR DISPOSAL")
(contact see Page 94).