SMA STP 15000TL Installation - Manual (Page 36)

Electrical Connection SMA Solar Technology AG
36 STP20TLHE-IA-IEN122222 Installation Manual
6.4.2 Assembling the DC Connectors
For connection to the inverter, all connection cables of the PV modules must be equipped with the DC
connectors provided.
To assemble the DC connectors, proceed as follows. Ensure the connectors have the correct polarity.
The DC connectors have the symbols "+" and "‒".
Cable requirements
• Use a PV1-F cable.
Procedure
1. Lead the stripped cable all the way into the plug.
2. Press the clamping bracket down.
☑ The clamping bracket snaps audibly into place.