SMA STP 15000TL Installation - Manual (Page 67)

SMA Solar Technology AG Messages
Installation Manual STP20TLHE-IA-IEN122222 67
10.2 Event Messages
During an update, the relevant display message is shown in the text line of the display.
Message Description
< Inst. code valid > The SMA Grid Guard code entered is valid.
The configured country data set is now unlocked and can
be changed.
If the configured country data set is protected, the
unlocking is valid for a maximum of 10 feed-in hours.
< No new update on the SD card > There is no update file relevant for this inverter on the
SD card or the available update has already been carried
out.
< Grid parameter unchanged > The selected switch setting is not programmed or there is
no country data set available on the
SD card.
< Parameters set successfully > All parameters of the SD card, e.g. country data set, have
been successfully adopted.
< Reading SD Card > The inverter is currently reading the SD card.
< Set parameter > The inverter sets the parameters of the SD card.
< Update completed > The inverter has successfully completed the update.
< Update Bluetooth > The inverter is updating the Bluetooth component.
< Update display > The inverter is updating the display.
< Update main CPU > The inverter is updating the inverter component.
< Update communication > The inverter is updating the communication component.
< Update RS485I module > The inverter is updating the RS485 communication
interface.
< Update language table > The inverter is updating the language table.
< Update file OK > The update file found is valid.