SMA STP 15000TL Installation - Manual (Page 57)

SMA Solar Technology AG Commissioning
Installation Manual STP20TLHE-IA-IEN122222 57
7.2 Display Messages during the Start Phase
• Firstly, the firmware version of the internal
processors appears in the text line.
• After an interval of 5 seconds, or after tapping on
the enclosure lid, the serial number or designation
of the inverter and the NetID for communication via
Bluetooth will appear. The designation of the
inverter can be changed with a communication
product.
• After another 5 seconds, or by tapping the lid
again, the selected country data set will appear
(e.g. "VDE-AR-N4105-HP").
• After a further 5 seconds, or after a further tap,
the configured language is displayed
(example: "Sprache Deutsch" (Language German).
• During normal operation, the text line of the display will subsequently be clear. See Section 10
"Messages" (page 66) for possible event messages which may be displayed in the text line and
their meaning.
Illustrated display messages
The display messages illustrated in this section serve as examples and, depending on the
country setting, may differ from the display messages on your inverter.
Showing display messages again
If you want to view the display messages of the start phase again whilst in normal
operation, double-tap the display.
FW PACK XXXX HP XXXX
SN 2100237148 NetIDA
Sprache Deutsch