SMA SUNNY HOME MANAGER Installation - Manual (Page 63)

SMA Solar Technology AG 9 Troubleshooting
Installation Manual HoMan-IA-en-17 63
9.6 Resetting the Sunny Home Manager
The reset button is located in a small aperture on the bottom of the Sunny Home Manager.
Depending on how long you hold down the reset button, the Sunny Home Manager is partially or
completely reset.
Procedure
• Press the reset button with a sharp object (e.g.
paper clip) and hold until the desired reset result
has been achieved:
• To reset the network settings of the
Sunny Home Manager, press the reset button
until the status LED and the energy consumption
LED are intermittently flashing orange.
• To completely reset the Sunny Home Manager,
press the reset button until the status LED and
the energy consumption LED are intermittently
flashing red.
Duration Result Status of the status LED and the
energy consumption LED
1 to 5 seconds ☑ The network settings of the
Sunny Home Manager are
reset.
Flashing orange intermittently
5 to 10 seconds The Sunny Home Manager is
completely reset:
☑ All settings of the Sunny Home
Manager are deleted.
☑ All cached PV system data
(energy values, events, etc.) are
deleted.
☑ The Sunny Home Manager
redetects the BLUETOOTH
devices located within range.
☑ The Sunny Home Manager must
be re-registered in Sunny Portal
(see Section 9.7, page 64).
Flashing red intermittently