SMA SUNNY HOME MANAGER Installation - Manual (Page 49)

SMA Solar Technology AG 8 Commissioning
Installation Manual HoMan-IA-en-17 49
Configuring Energy Meters
1. If energy meters are connected to the Sunny Home Manager, select the energy meter type
connected to the respective meter input in the drop-down lists Meter input 1, Meter input 2
and Meter input 3:
2. Select [Next].
☑ The page Extended PV System Properties opens.
Entering PV System Data
1. Enter the PV system data.
2. Select [Next].
☑ The PV System Setup Assistant shows a summary of your entered data.
3. Select [Finish].
☑ Sunny Portal confirms successful registration of the Sunny Home Manager system in a
separate window.
4. To change to the Sunny Home Manager system, select [To the PV system].
☑ The Sunny Home Manager system opens.
5. Enter the system properties (see user manual "Sunny Home Manager in Sunny Portal").
Connected energy meter type Drop-down list
Energy meter with D0 Interface • Select D0.
Bidirectional meter with D0 interface • Select D0.
• Activate the field Bidirectional meter
(consumption and feed-in).
☑ The area Meter input 2 is not
available.
Energy meter with S0 interface • Select S0.
• In the text field S0 pulses/kWh, specify
the pulse rate of the energy meter
(see energy meter manual).
SMA Energy Meter • Select SMA Energy Meter xxx.
The placeholder for the SMA Energy
Meter serial number is xxx. If there are
two SMA Energy Meters in the PV system,
select the desired SMA Energy Meter.
• Activate the checkbox Bidirectional
meter (consumption and feed-in).
No energy meter • Select no meter.