SMA SUNNY HOME MANAGER Installation - Manual (Page 10)

2 Safety SMA Solar Technology AG
10 HoMan-IA-en-17 Installation Manual
SMA Radio-Controlled Socket
The SMA radio-controlled socket supports load control in households with the
Sunny Home Manager.
The product is not splash-proof.
The product is designed for indoor use only.
The product is approved for use in all EU member states.
Use this product only in accordance with the information provided in the enclosed documentation and
with the locally applicable standards and directives. Any other application may cause personal injury
or property damage.
Do not connect any medical devices to the product.
Do not connect any loads to the product if they require a continuous supply of electric current
(e.g. refrigerator, freezer).
Do not connect any loads to the product if they can cause injuries or fires if unintentionally switched
on (e.g. iron).
Only connect loads to the product if they are suitable for the voltage and power range of the wall
outlet and the product (see Section 11.2 "SMA Radio-Controlled Socket", page 70).
Only connect the product to properly installed outlets with a protective contact.
For safety reasons, it is not permitted to modify the product or install components that are not explicitly
recommended or distributed by SMA Solar Technology AG for this product. Unauthorized changes
and modifications will void all warranty claims and the operating permission.
Any use of the product other than described in the Intended Use section does not qualify as
appropriate.
The enclosed documentation is an integral part of this product. Keep the documentation in a
convenient place for future reference and observe all instructions contained therein.
The type label must remain permanently attached to the product.