SMA SUNNY HOME MANAGER Installation - Manual (Page 33)

SMA Solar Technology AG 6 Installation
Installation Manual HoMan-IA-en-17 33
6.4 Mounting the Sunny Home Manager
6.4.1 Mounting the Sunny Home Manager on the Wall
1. Define the position of the Sunny Home Manager on the wall.
2. Mark the position of the drill holes on the wall (distance between drill holes: 58 mm).
3. Drill the holes (diameter: 6 mm).
4. Insert the screw anchors into the holes.
5. Screw in the screws leaving approximately 6 mm protruding from the wall.
6. Hook the Sunny Home Manager onto the screws.
Ensure that the heads of the screws are engaged in
the holes at the back of the Sunny Home Manager.
6.4.2 Mounting the Sunny Home Manager on the Top-Hat Rail
Requirement:
☐ The top-hat rail must be firmly installed on the wall.
Procedure
1. Press the Sunny Home Manager with the upper
retainers into the upper edge of the top-hat rail.
2. Hook the lower retainers into the lower edge of the
top-hat rail.