SMA SUNNY HOME MANAGER Installation - Manual (Page 23)

SMA Solar Technology AG 4 Product Description
Installation Manual HoMan-IA-en-17 23
Energy Consumption LED
The energy consumption LED is only active if either the bidirectional meter for grid feed-in and
purchased electricity is connected or one feed-in meter and one purchased electricity meter are
connected.
Status LED
Further states of the status LED are described in the Section "Troubleshooting" (see Section 9.1.2
"States of the Status LED", page 52).
BLUETOOTH LED
Further states of the BLUETOOTH LED are described in the Section "Troubleshooting"
(see Section 9.1.3 "States of the BLUETOOTH LED", page 54).
LEDs on the Network Terminal
Figure 5: LEDs on the network terminal
LED status Explanation
Glowing green The household is being supplied with energy from the PV system only.
Flashing green and
orange intermittently The household is being supplied with energy from the PV system and from
the utility grid.
Glowing orange The household is being supplied with energy from the utility grid only.
LED status Explanation
Glowing green The Sunny Home Manager is connected to the devices of the PV system
and Sunny Portal.
LED status Explanation
Glowing blue The BLUETOOTH connection to the devices of the PV system is good.
Position LED LED status Explanation
A Link/Activity
LED (green) Glowing Network connection established
Flashing Network connection established. Data is being sent or
received.
Off No network connection established
B Speed LED
(yellow) Glowing The data transfer rate is up to 100 Mbit/s.
Off The data transfer rate is up to 10 Mbit/s.