SMA SUNNY HOME MANAGER Installation User Manual
Page 50
8 Commissioning
SMA Solar Technology AG
50
HoMan-IA-en-17
Installation Manual
8.3 Setting the Operating Mode of the SMA Radio-Controlled
Socket
You can configure the operating mode of the SMA radio-controlled socket via the touch key on the
SMA radio-controlled socket or via Sunny Portal (see user manual "SUNNY HOME MANAGER in
Sunny Portal").
Requirements:
☐ The SMA radio-controlled socket must be inserted in an outlet.
☐ The upper horizontal LED must be glowing orange or green.
Procedure
Operating mode
Explanation
Automatic
The SMA radio-controlled socket is controlled by the
Sunny Home Manager. Depending on the current control command of the
Sunny Home Manager, the SMA radio-controlled socket is either
switched on or off in this mode.
• On: The connected load can draw electric current.
• Off: The connected load cannot draw electric current.
Manually switched on The SMA radio-controlled socket is switched on. The connected load can
draw electric current.
The SMA radio-controlled socket is not controlled by the
Sunny Home Manager.
Manually switched off The SMA radio-controlled socket is switched off. The connected load
cannot draw electric current.
The SMA radio-controlled socket is not controlled by the
Sunny Home Manager.
1.
Requirement for "Automatic" mode
You can only set Automatic mode if you have configured the SMA radio-controlled
socket for the connected load in Sunny Portal.
• If the SMA radio-controlled socket was not registered together with the
Sunny Home Manager in Sunny Portal, add the SMA radio-controlled socket to the
system as a new device (see user manual "SUNNY HOME MANAGER in
Sunny Portal").