SMA SC-COM - Manual (Page 41)

SMA Solar Technology AG 10 Appendix
Operating Manual SC-COM-BE-en-20 41
10.2.2 Parameters and Values for the custom.xml File
NetworkSettings_DhcpUsage1
False
Here, you can set the parameters and your values
(see Section 10.2.2 "Parameters and Values for the
custom.xml File", page 41).
2500
You can set the period in ms that determines the
shut-down time of the SC-COM after the SC-COM has
received the signal of the Sunny Central's uninterruptible
power supply about the failure of the voltage supply.
The value must be larger than or equal to 2,500. This
setting is immediately adopted after the file is uploaded.
Example: XML file for setting the Czech language for the user interface
XMLSchema-instance" xsi:noNamespaceSchemaLocation="config_100.xsd">
my config V1.01
NativeSettings_Language
cs
Parameters Explanation Values Default
values
NetworkSettings_DhcpUsage1 Activates the DHCP for LAN2. The True
value ignores all other settings of the IP
addresses for LAN2.
True False
False
NetworkSettings_DnsIpAddr1 Sets the first IPv4 address of the DNS server
for LAN2
‒ ‒
0.0.0.0
A valid IPv4
address
NetworkSettings_Dns2IpAddr1 Sets the second IPv4 address of the DNS
server for LAN2
‒ 0.0.0.0
0.0.0.0
A valid IPv4
address
NetworkSettings_Gateway1 Sets the gateway address for LAN2 0.0.0.0 0.0.0.0
NetworkSettings_IpAddr1 Sets the IPv4 address for LAN2 A valid IPv4
address
172.24.1.51
NetworkSettings_SubnetMask1 Sets the subnet mask for the LAN2 255.255.0.0 255.255.0.0
Element of the XML file Explanation