SMA SC-COM - Manual (Page 22)

6 Setting the SC-COM SMA Solar Technology AG
22 SC-COM-BE-en-20 Operating Manual
6.2 Configuring System Settings
6.2.1 Setting the Date, Time and Time Zone
1. Log in on the user interface.
2. Select Sunny Central > Settings > System.
3. Select [Change] in the field Time zone (UTC offset).
4. Select the correct time zone in the drop-down list Time zone (UTC offset).
5. Select an option in the Automatic change from summer time to winter time field:
6. Enter the current date in the New date field.
7. Enter the current time in the New time field.
8. Select the button [Save].
6.2.2 Setting the Language
You can also set the language of the user interface via the XML file custom.xml (see Section 6.3 "Customer-Specific
Settings via XML File", page 24).
Procedure:
1. Log in on the user interface.
2. Select Sunny Central > Settings > System.
3. Select the desired language in the Language field.
4. Select the button [Save].
6.2.3 Entering the Operator Name
1. Log in on the user interface.
2. Select Sunny Central > Settings > System.
3. Enter the operator name in the Operator name field.
4. Select the button [Save].
6.2.4 Resetting the SC-COM
Resetting the SC-COM will restore all settings and parameters to their default settings. If you have uploaded the file
custom.xml, the settings in this file take effect.
Option Explanation
yes Automatic change from summer time to winter time is active.
no Automatic change from summer time to winter time is not active. Date and time have to be set
manually.
Data backup
• Before you reset the SC-COM, note down all settings such as network or portal settings.
• To avoid data loss, be sure to back up your PV plant data.