HEIDENHAIN TNC 640 (34059x-04) ISO programming - Manual (Page 482)

Manual operation and setup
15.6 Using 3-D touch probes
15
482
TNC 640 | User's Manual for DIN/ISO Programming | 3/2014
15.6 Using 3-D touch probes
Overview
The following touch probe cycles are available in the Manual
Operation mode:
HEIDENHAIN only gives warranty for the function of
the probing cycles if HEIDENHAIN touch probes are
used.
The TNC must be specially prepared by the machine
tool builder for the use of a 3-D touch probe. Refer to
your machine manual.
Function Soft key Page
Calibrating the effective length 491
Calibrating the effective radius 492
Measuring a basic rotation using a
line
496
Setting a datum in any axis 498
Setting a corner as datum 499
Setting a circle center as datum 501
Setting the centerline as datum 503
Touch probe system data
management
See
User’s
Manual
for Cycles