beautypg.com

Displaying externally generated files on the tnc, Data backup – HEIDENHAIN TNC 640 (34059x-04) ISO programming User Manual

Page 108

background image

Programming: Fundamentals, file management

3.3

File manager: Fundamentals

3

108

TNC 640 | User's Manual for DIN/ISO Programming | 3/2014

Displaying externally generated files on the TNC

The TNC features several additional tools which you can use to

display the files shown in the table below. Some of the files can

also be edited.

File types

Type

PDF files

Excel tables

Internet files

pdf

xls

csv

html

Text files

txt

ini

Graphics files

bmp

gif

jpg

png

For further information about displaying and editing the listed file

types: See page 121

Data Backup

We recommend saving newly written programs and files on a PC at

regular intervals.
The TNCremoNT data transmission freeware from HEIDENHAIN is

a simple and convenient method for backing up data stored on the

TNC.
You additionally need a data medium on which all machine-

specific data, such as the PLC program, machine parameters,

etc., are stored. Ask your machine manufacturer for assistance, if

necessary.

Saving the contents of the entire hard disk (2GB) can

take up to several hours. In this case, it is a good

idea to save the data outside of work hours, e.g.

during the night.
Take the time occasionally to delete any unneeded

files so that the TNC always has enough hard-disk

space for system files (such as the tool table).

Depending on operating conditions (e.g., vibration

load), hard disks generally have a higher failure rate

after three to five years of service. HEIDENHAIN

therefore recommends having the hard disk

inspected after three to five years.