HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 413)

Inclined-tool machining in a tilted plane (option 9) 12.3
12
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
413
12.3 Inclined-tool machining in a tilted
plane (option 9)
Function
In combination with M128 and the new PLANE functions,
inclined-
tool machining in a tilted machining plane is now possible. Two
possibilities are available for definition:
Inclined-tool machining via incremental traverse of a rotary axis
Inclined-tool machining in a tilted machining plane
only functions with spherical cutters.
Inclined-tool machining via incremental traverse of a
rotary axis
Retract the tool
Define any PLANE function; consider the positioning behavior
Activate M128
Via a straight-line block, traverse to the desired incline angle in
the appropriate axis incrementally
Example NC blocks
...
N12 G00 G40 Z+50 *
Position at clearance height
N13 PLANE SPATIAL SPA+0 SPB-45 SPC+0 MOVE ABST50
F900 *
Define and activate the PLANE function
N14 M128 * Activate M128
N15 G01 G91 F1000 B-17 * Set the incline angle
... Define machining in the tilted working plane