HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 175)

Tool data 5.2
5
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
175
Soft key Editing functions for tool tables
Show all drills in the tool table
Show all cutters in the tool table
Show all taps/thread cutters in the tool table
Show all touch probes in the tool table
Exiting any other tool table
Call the file manager and select a file of a different type, such as
a part program
Importing tool tables
The machine manufacturer can adapt the IMPORT
TABLE function. Refer to your machine manual.
If you export a tool table from an iTNC 530 and import it into a
TNC 620, you have to adapt its format and content before you can
use the tool table. On the TNC 620, you can adapt the tool table
conveniently with the
IMPORT TABLE function. The TNC converts
the contents of the imported tool table to a format valid for the
TNC 620 and saves the changes to the selected file. Follow this
procedure:
Save the tool table of the iTNC 530 to the TNC:\table directory
Select the Programming mode of operation.Programming
Call the file manager: Press the PGM MGT key
Move the highlight to the tool table you want to import
Press the
MORE FUNCTIONS soft key
Shift the soft-key row
Select the
IMPORT TABLE soft key: The TNC inquires whether
you really want to overwrite the selected tool table
Do not overwrite the file: Press the
CANCEL soft key, or
Overwrite the file: Press the OK soft key
Open the converted table and check its contents