HEIDENHAIN TNC 620 (81760x-02) ISO programming - Manual (Page 155)

Error messages 4.8
4
TNC 620 | User's ManualDIN/ISO Programming | 2/2015
155
Informational texts
After a faulty operation, such as pressing a key without function
or entering a value outside of the valid range, the TNC displays a
(green) text in the header, informing you that the operation was not
correct. The TNC clears this informational text upon the next valid
input.
Saving service files
If necessary, you can save the "Current status of the TNC," and
make it available to a service technician for evaluation. A group of
service files is saved (error and keystroke logs, as well as other
files that contain information about the current status of the
machine and the machining operation).
If you repeat the "Save service files" function with the same
file name, the previously saved group of service data files is
overwritten. To avoid this, use another file name when you repeat
the function.
Saving service files
Open the error window.
Press the LOG FILES soft key.
Press the SAVE SERVICE FILES soft key: The TNC
opens a pop-up window in which you can enter a
name for the service file.
Save the service files: Press the
OK soft key.
Calling the TNCguide help system
You can call the TNC's help system via soft key. Immediately the
help system shows you the same error explanation that you receive
by pressing the
HELP soft key.
If your machine manufacturer also provides a help
system, the TNC shows an additional
MACHINE
MANUFACTURER soft key with which you can call
this separate help system. There you will find further,
more detailed information on the error message
concerned.
Call the help for HEIDENHAIN error messages
Call the help for HEIDENHAIN error messages, if
available