HEIDENHAIN CNC Pilot 4290 V7.1 Description of B and Y axes - Manual (Page 69)

HEIDENHAIN CNC PILOT 4290 69
1
.12 Simulation
Displaying the coordinate system
The simulation can show the shifted/rotated coordinate system in the
“lathe window,” if required. To use this feature, you need to stop the
simulation.
U Press the Continue key. The simulation displays the
current coordinate system.
The coordinate system disappears when the next command is
simulated or when you press Continue once again.
Position display with the B and Y axes
The following boxes of the display cannot be edited:
„ N: Block number of the NC source block
„ X, Z, C: Position values (actual values)
The other boxes can be set with the PgUp / PgDown keys or with the
“Set > Status line” menu:
„ Default settings (values of the selected slide):
„ Y: Position value (actual value)
„ T: Tool data with turret pocket, magazine pocket (in “(..)”) and ID
number
„ Technology data settings:
„ Speed
„ Feed rate
„ Direction of spindle rotation
„ B axis settings:
„ B: Tilt angle of the B axis
„ G16/B: Angle of the tilted plane