HEIDENHAIN CNC Pilot 4290 V7.1 Description of B and Y axes - Manual (Page 45)

HEIDENHAIN CNC PILOT 4290 45
1
.9 DIN PLUS: Mag
a
zine T
ools
As of software version 625 952-02:
Returning the tool to the magazine: If you program G714 without
an “ID number,” the CNC PILOT will return the active tool to the
magazine without inserting a new tool.
Changing the tool position: If the call refers to the active tool, the B
axis is tilted and/or the position angle is changed. In the parameter
“V,” you can define whether this function is to be executed at the
current position or at the tool change position.
Offset position angle: With the “offset position angle” you can
position turning tools in the “normal” attitude or “upside down.”
When positioning the tool, the CNC PILOT also takes the basic setting
saved in the tool database into account (position angle = position angle
from the tool data + offset position angle).
Tool orientation: The CNC PILOT takes the orientation of the cutting
edge into account when calculating the position of the tool tip. The
control distinguishes between roughing, finishing and button tools as
well as recessing and threading tools (see figure).
V Approach the tool change position (default: 6)
„ No entry: Move simultaneously in X, Y and Z directions.
„ 0: Move simultaneously in X and Z directions
„ 1: First X, then Z direction
„ 2: First Z, then X direction
„ 3: X direction only
„ 4: Z direction only
„ 5: Y direction only
„ 6: Move simultaneously in X, Y and Z directions
„ 9: Do not approach the tool change position
Parameters
Q
Additional functions
You can use this parameter to transfer a value to the tool
change. The function of this value is defined by the machine
tool builder.
X Diameter
X diameter to which the tool moves at the end of the tool
change, if required.
Z Length
Z position to which the tool moves at the end of the tool
change, if required.
Y Length
Y position to which the tool moves at the end of the tool
change, if required.
Parameters