HEIDENHAIN PT 855 for Milling - Manual (Page 35)

I - 2 Working with POSITIP – First Steps
POSITIP 855 Operating Instructions 33
Displaying and moving to positions
ENT
Traverse the X axis until the display value is zero.
The square in the graphic positioning aid is now centered
between the two triangular marks.
Select the Y axis.
ENT
Transfer the displayed nominal position ( I +30) directly as nominal value for Y.
The graphic positioning aid for the Y axis is displayed.
Traverse the Y axis until the display value is zero.
The square in the graphic positioning aid is now centered
between the two triangular marks.
Confirm your entry.
The graphic positioning aid for the X axis is displayed.
Select the Z axis.
1 2
N o m i n a l p o s i t i o n v a l u e ?
ENT
Enter the nominal position value for the hole depth: Z = –12 mm.
Confirm your entry.
The graphic positioning aid for the Z axis is displayed.
Drill hole : traverse the Z axis until the display value is zero.
The square in the graphic positioning aid is now centered
between the two triangular marks.
Retract the drill in the tool axis (Z).
2