HEIDENHAIN PT 855 for Milling - Manual (Page 29)

I - 2 Working with POSITIP – First Steps
POSITIP 855 Operating Instructions 27
Store the position of the edge.
P r o b e 1 s t e d g e i n X
Touch the first workpiece edge .
P r o b e 2 n d e d g e i n X
Touch the second workpiece edge .
Store the position of the edge.
POSITIP displays the distance between the two edges.
Probing functions for datum setting
Retract the tool from the workpiece.
0
ENT
Enter coordinate (X = 50 mm)
and
transfer coordinate as datum for the centerline.
5
E n t e r v a l u e f o r X
+ 0
1
2