HEIDENHAIN PT 855 for Milling - Manual (Page 33)

I - 2 Working with POSITIP – First Steps
POSITIP 855 Operating Instructions 31
Displaying and moving to positions
Select the Y axis.
0
N o m i n a l p o s i t i o n v a l u e ?
Enter the nominal position value for corner point : Y = +50 mm
and
select tool radius compensation R +.
5
ENT
Traverse the Y axis until the display value is zero.
The square in the graphic positioning aid is now centered
between the two triangular marks.
Select the X axis.
Transfer the nominal position value.
The graphic positioning aid for the Y axis is displayed.
0
N o m i n a l p o s i t i o n v a l u e ?
Enter the nominal position value for corner point : X = +60 mm
and
select tool radius compensation R +.
6
ENT
Traverse the X axis until the display value is zero.
The square in the graphic positioning aid is now centered
between the two triangular marks.
Transfer the nominal position value.
The graphic positioning aid for the X axis is displayed.
3
4