HEIDENHAIN PT 855 for Milling - Manual (Page 18)

I - 2 Working with POSITIP – First Steps
16 Operating Instructions POSITIP 855
Fig. 13:On-screen operating instructions for
PROBE CIRCLE CENTER
, page 1
Fig. 15: On-screen operating instructions for
PROBE CIRCLE CENTER
, page 3
Fig. 14: On-screen operating instructions for
PROBE CIRCLE CENTER
, page 2
On-screen operating instructions
The integrated operating instructions provide information and assist-
ance in any situation.
To call the operating instructions:
ä Press the HELP key.
ä Use the paging keys if the explanation is spread over more than
one screen page.
To leave the operating instructions:
ä Press the HELP key again.
Example: On-screen operating instructions for datum setting
with the edge finder (
PROBE CIRCLE CENTER
)
The
PROBE CIRCLE CENTER
function is described in this manual
on page 25.
ä Select the
ACTUAL VALUE
operating mode.
ä Press the
Probe
soft key.
➤ Press the HELP key.
The first page of the operating instructions for the Probe function
appears.
Page reference at the lower right of the screen:
the number in front of the slash is the current page, the number
behind the slash is the total number of pages.
The on-screen operating instructions now contains the following
information on
ACTUAL VALUE – PROBE
(on three pages):
• Overview of the probing functions (page 1)
• Graphic illustration of all probing functions
(pages 2 and 3)
ä To leave the operating instructions:
Press HELP again.
The screen returns to the selection menu for the probing func-
tions.
ä Press (for example) the soft key
Circle Center
.
ä Press HELP.
The screen now displays operating instructions – spread over
five pages – on the
PROBE CIRCLE CENTER
function including:
• Overview of all work steps (page 1)
• Graphic illustration of the probing sequence (page 2)
• Information on how POSITIP reacts and on datum setting
(page 3)
• Probing function
Circle Center
for tools (pages 4 and 5)
ä To leave the on-screen operating instructions:
Press HELP.